|
Call for systems pricing and configuration.
541-621-4588
Frequency coverage
IC-FR3000
IC-FR4000 |
148–172MHz, 150–174MHz
400–430MHz, 430–450MHz, 450–480MHz |
| Number of channels |
32 channels |
| Channel spacing |
12.5/25kHz |
| PLL channel step |
5, 6.25kHz
(2.5kHz, VHF repeater operation only) |
Frequency stability
IC-FR3000
IC-FR4000 |
±2.5ppm
±1.5ppm (U.S.A. version),
±2.5ppm (Other
versions) |
| Operating temperature range |
–30°C to +60°C;
–22°F to +140°F |
|
Power supply voltage
(depending on
version) |
100–120V AC (50/60Hz),
220–240V AC (50/60Hz),
13.6V DC |
| Current drain (at 13.6V DC) |
| TX |
IC-FR3000 |
(at 50W) |
15A |
| |
IC-FR4000 |
(at 50W) |
20A |
| RX |
Max. audio |
2A typ. |
|
| |
Stand-by |
1A typ. |
| |
| Antenna impedance |
50Ω(Type-N×2) |
| Dimensions (WxHxD) |
410 ×110 ×360 mm;
165⁄32 × 411⁄32 ×
143⁄16 in |
| Weight |
12kg; 26.4lb (approx.) |
| Receiver |
| Sensitivity |
0.25μV typ. (at 12dB SINAD) |
| Adjacent channel selectivity |
70dB (wide) 60dB (narrow) |
| Spurious response |
70dB |
| Intermodulation rejection ratio |
70dB |
| Intermodulation rejection ratio |
40dB (wide) 34dB (narrow) |
| Audio output power |
2.5W typ. at 10% distortion with a 4Ω load |
| External speaker connector |
2-conductor 3.5 (d) mm
(1⁄8″)/4Ω |
| Transmitter |
| Output power |
50W (high), 10W (low)
selectable (at 13.6V DC) |
| Max. frequency deviation |
±5.0kHz (wide) ±2.5kHz (narrow) |
| Spurious emissions |
70dB |
| Adjacent channel power |
70dB (wide) 60dB (narrow) |
| Hum and noise |
40dB (wide) 34dB (narrow) |
| Microphone impedance |
600Ω (8-pin modular) |
PA Specifications - VHF High Band Continuous Duty
| Amplifier |
|
Max. rated load VSWR
for continuous duty operation |
1.2:1 (<5% reflected power) |
|
Max. VSWR rating
without damage |
5:1 all phase angles. VSWR or thermal protection may operate above 2:1
VSWR |
| Input/output connectors |
Type N FEMALE standard
UHF FEMALE optional |
| Spurious Outputs |
Meets FCC requirements |
| Harmonics |
Meets FCC requirements |
| Operating Temperature range |
0 - 50°C |
| Input Return Loss |
> 10 dB |
| Cooling |
Fan cooled |
Measurements made in accordance with EIA/TIA-603-A. Compatibility of
functions for use with a telephone line may not work in some countries. All
stated specifications are subject to change without notice or
obligation.
|
| |
When an emergency breaks, you can't afford to spend time worrying about your
communication system's performance or capabilities. That's why Icom America
Systems (IAS) offers more standard features and hardware in our 100 Watt system
than any of our competitors -- for less money! Unlike other standard packages,
your 100 Watt repeater/base will arrive ready-to-use and custom-built to your
specific communication needs. It's compatible with your existing equipment, or
it can be the foundation for your communications' network. We take the guesswork
out of setting up a communication system out of your hands so you can focus on
what you do best – saving lives and averting
crises.
The standard package includes:
- 100 Watt 100 percent duty cycle
- Multiple CTCSS & DTCS tone
memories with multiple memory
channels
- Telephone interconnect capability
- DTMF remote control capability
- Interface cabling with silver plated connectors (custom-made)
- Built-in battery back-up capabilities
- Mounting bracket capable of being mounted in rack or cabinet
- Tech support
|
IAS gets you
more!
The standard package also
includes:
- A.C. surge suppression panel
- Complete tuning, aligning, assembly, programming and staging for your system
done in our laboratory
- Crating and packaging for shipment
- Operations, instructions and service manuals
- As-built drawing packages
- Quick connect grounding system; engineered to meet industry standards
|
Additional Features
- Master/Slave backup operation by connecting two repeaters/ bases
- Self-check function checks for internal errors and alerts with a beep sound
or with a phone call
- Accessory connector (D-sub 25-pin) on the rear panel for trunking controller
including LTR, PassPort, SmarTrunkII and MPT1327
- Tone and DC remote capabilities
- 5-Tone relay function
- Optional Voice Scrambler UT-109 or UT-110
- CW ID transmitter (DTMF or 5-Tone also selectable)
- Password and kill/stun function for security
- 16-digit alphanumeric display convenient for base station operation
- A programmable button gives access to a customized function
| |
|
|
AS100Wv/u Series