IcomUSA

The only thing better than our prices is our service
Home      CY-F121 Series

Call for systems pricing and configuration. 541-621-4588

Icom CY-F121S Series

Frequency coverage
IC-F121S
IC-F221S
136-174MHz
400-430MHz
440-490MHz
Number of channels

Max. 8 channels

(4 channels x 2 banks)

Channel spacing 12.5/25kHz (narrow/wide)
Antenna connector SO-293 (50Ω)

Power supply voltage

(Negative ground)

13.2V DC nominal [25W]

13.6V DC nominal [50W]

Current drain (approx.)

TX [25W]   7.0A
     [45W] [50W] 13.0A
Max audio   1.2A
Standby   0.3A
Operating temp. range

-30°C to +60°C;

 (-22°F to +140°F)

Dimensions

[25W]

[45W][50W]

(Projections not included)

480(W) x 133(H) x 364(D)mm;

18.90”(W) x 5.24”(H) x 14.33”(D)

480(W) x 133(H) x 364(D)mm;

18.90”(W) x 5.24”(H) x 14.33”(D)

Weight

8.6 kg; 18 lb. [25W]

8.6 kg; 18 lb. [45W][50W]

Transmitter

RF Output power

(High/Low2/Low1)

25W/10W/2.5W [25W]
50W/25W/4.5W [45W]
50W/25W/5W [50W]
Modulation system

Variable reactance frequency modulation

Max. freq. deviation ±2.5/5.0kHz (narrow/wide)
Frequency error

IC-F121S ±5.0 ppm

 IC-F221S ±2.5 ppm

Spurious emission 70dB typical
Adjacent channel power 60/70dB (narrow/wide)
Audio freq. response

+2 dB to -8 dB of 6 dB/octave range from: 300Hz to

 2550/3000Hz (narrow/wide)

Audio harmonic dist. 3% typ. at 1kHz, 40% deviation

FM hum and noise

(typ., with CCIT filter)

40 dB (narrow)

46 dB (wide)

Limiting character of

 modulation

70-100% of max deviation
Microphone connector: 8-pin modular (600Ω)
Receiver
Receive system

Double-conversion superheterodyne system

Intermediate freq

1st: 46.35MHz

2nd: 450kHz

Sensitivity 0.25μV at 12dB SINAD
Squelch sensitivity 0.25μV
Adjacent channel selectivity (typical) 65/75dB (narrow/wide)
Spurious response 75dB
Intermodulation (typ.) 74dB
Hum and Noise (typ.) 40/45dB (narrow/wide)
Audio output power

4W typ. at 10% distortion with a 4Ω load

Ext. SP connector 2-conductor 3.5 (d) mm (18″)/4Ω

All specifications subject to change without notice or obligation.



 
  • Compact size
  • 50 Watts (45 UHF)
  • Affordable price

A version to match your needs

The CY-F121S/CY-F221S is available in 3 versions:

  • Version 1 - Repeater and duplexer
  • Version 2 - Repeater and power supply (15A or 18A)
  • Version 3 - Repeater, duplexer and power supply (15A or 18A)

AC/DC supply available

Power failure? Not a problem. The CY-F121S/CY-F221S can be configured to auto switch from AC to DC.

Up to 8 channels

The CY-F121S/CY-F221S is the perfect choice for schools, warehouses, or anywhere when a simple yet powerful repeater is needed.

Built-in power supply

With 50/45 Watts of power VHF/UHF, the CY-F121S/CY-F221S is strong enough to carry your signal many miles*. A built-in cooling fan and plenty of air flow room helps keep things running cool. A low power version is available for in-plant or on campus applications.
* As with all radio equipment, distance covered varies depending on terrain, atmospheric conditions, receiving equipment and antenna used.

Compact size

Set the CY-F121S/CY-F221S on a desktop, or mount it in a rack. It's 19” wide (48.25 cm) front panel is three rack units high.

Open

Clean and simple internal layout is easy to access and maintain. Repeater, duplexer and power supply, all in one box.

Rear

Plenty of ventilation holes for proper cooling. Pressing PTT automatically activates a quiet fan. The fan stays on for 2 minutes after the switch is released.

Additional Features

Built in simple controller which controls:

  • Transmit and receive audio path
  • PTT Control of transmitter
  • Transmitter hang ON time delay from 0 to 7.5 seconds
  • Cooling fan ON/OFF control with 2 minutes time delay

Other features

  • Busy lockout and repeater lockout
  • Power on password 100% duty cycle @ 20W, 50% duty cycle @ 50/45 W
  • Accessory connector (ACC) connects to remote controllers